Midea Ducted Air Conditioning Melbourne
A Midea ducted reverse cycle system heats and cools the whole home from a concealed indoor unit in the roof or ceiling, with air delivered to each room through ducts and discreet outlets. EZYAIR designs, supplies and installs Midea ducted air conditioning across Melbourne on request.
Is Midea ducted air conditioning right for your home?
Ducted air conditioning suits Melbourne homes that want even, quiet comfort in every room, with only grilles visible inside. It needs space for the indoor unit and ductwork, and a location for the outdoor unit. If you only need to condition a few rooms, a Midea multi split system or Midea split system may suit better.
Current Midea ducted ranges
The following ducted ranges are listed on Midea Australia's ducted systems page (mdhome.com.au) at the time of writing (October 2026). EZYAIR supplies and installs reverse cycle ducted systems up to 25kW.
- Midea Vesta Ducted
- Midea Ducted Series - RAC
- Midea Quantum Series
- Midea slim ducted and bulkhead options
EZYAIR is an independent air conditioning installer. We supply and install the Midea systems below on request; availability of individual models is confirmed at quote stage. Product information on this page is copied from the product pages and brochures on Midea HVAC & Energy Australia's official website (mdhome.com.au), with links to each official product page and brochure. Figures are as published by the manufacturer (dash characters in ranges are shown as hyphens). Where a figure is not published it is shown as a hyphen or not shown. Tables scroll sideways on smaller screens.
Midea Vesta Ducted
R32 ducted range from 7kW to 17kW that Midea describes as "Slim & Splittable". Midea's brochure says the integrated unit is just 380mm high for tight ceiling spaces, while the splittable version is compatible with existing ductwork for homes upgrading a current ducted system.
- System: Heating and cooling (reverse cycle)
- Refrigerant: R32
- Power supply: Single phase
- Sizes listed: 7kW, 9kW, 10.5kW, 12.5kW, 14kW, 17kW
- Midea lists it as a "VEU approved product" (eligibility for a VEU discount is confirmed for each project)
- Features listed by Midea: slim and splittable design, high energy efficiency, easy maintenance, quiet operation, smart zoning control, easy installation and service
- Midea's brochure notes ceiling and floor concealed installation are available for the 7kW model only
Midea Vesta Ducted brochure (PDF, mdhome.com.au) | Official range page
Specifications: Vesta Ducted, single phase (6 models)
| Indoor unit | DUCMI70IC | DUCMI90IC | DUCMI105IHC | DUCMI125IHC | DUCMI140IHC | DUCMI170IHC |
|---|---|---|---|---|---|---|
| Outdoor unit | UCMI70OC | UCMI90OC | UCMI105OC | UCMI125OC | UCMI140OC | UCMI170OC |
| Size listed | 7 kW | 9 kW | 10.5 kW | 12.5 kW | 14 kW | 17 kW |
| Rated current (max current) | 16 A | 21 A | 21 A | 31 A | 31 A | 31 A |
| Supply air duct connection (W x H) | 827 x 178 mm | 1027 x 178 mm | 1027 x 233 mm | 1027 x 233 mm | 1152 x 295 mm | 1152 x 295 mm |
| Return air duct connection (W x H) | 892 x 212 mm | 1092 x 212 mm | 1092 x 267 mm | 1092 x 267 mm | 2 x 400 (Oval) mm | 2 x 400 (Oval) mm |
| Refrigerant type / charge (kg) | R32/1.5 | R32/2.6 | R32/2.6 | R32/3.5 | R32/3.5 | R32/3.8 |
| Refrigerant piping, liquid / gas | 9.52mm(3/8in)/15.9mm(5/8in) | 9.52mm(3/8in)/15.9mm(5/8in) | 9.52mm(3/8in)/15.9mm(5/8in) | 9.52mm(3/8in)/15.9mm(5/8in) | 9.52mm(3/8in)/15.9mm(5/8in) | 9.52mm(3/8in)/19mm(3/4in) |
| Max. refrigerant pipe length | 50m | 75m | 75m | 75m | 75m | 75m |
| Max. difference in level | 25m | 30m | 30m | 30m | 30m | 30m |
Source: Midea HVAC & Energy Australia (mdhome.com.au), Vesta Ducted product page. Specifications are reproduced as published by the manufacturer and may change. Please confirm current model details with us before purchase.
Midea Ducted Series - RAC
R32 ducted range from 7.0kW to 17.0kW with constant air volume control and a built-in drain pump. Midea labels the 7.0kW, 9.0kW and 10.5kW models as middle static pressure with a Slim Design, and the 12.5kW, 14.0kW and 17.0kW models as high static pressure.
- System: Heating and cooling (reverse cycle)
- Refrigerant: R32
- Power supply: Single phase
- Cooling capacities listed: 7.0kW, 9.0kW, 10.5kW, 12.5kW, 14.0kW, 17.0kW
- Features listed by Midea: R32 refrigerant, constant air volume control, low noise, easy maintenance, built-in drain pump
Midea R32 Ducted brochure (PDF, mdhome.com.au) | Official range page
Specifications: Ducted Series - RAC, single phase (6 models)
| Indoor unit | DUCMI70IB | DUCMI90IB | DUCMI105IHB | DUCMI125IHB | DUCMI140IHB | DUCMI170IHB |
|---|---|---|---|---|---|---|
| Outdoor unit | UCMI70OB | UCMI90OB | UCMI105OB | UCMI125OB | UCMI140OB | UCMI170OB |
| Cooling capacity | 7.0 kW | 9.0 kW | 10.5 kW | 12.5 kW | 14.0 kW | 17.0 kW |
| Heating capacity | - | 10.5 kW | 11.0 kW | - | - | 17.5 kW |
| Static pressure type | Middle Static Pressure (Slim Design) | Middle Static Pressure (Slim Design) | Middle Static Pressure (Slim Design) | High Static Pressure | High Static Pressure | High Static Pressure |
| Indoor airflow (Hi) | 1400 m³/h | 1400 m³/h | 2000 m³/h | 3250 m³/h | 3300 m³/h | 3250 m³/h |
| Noise rating (Hi) | 45 dB(A) | 45 dB(A) | 49 dB(A) | 49 dB(A) | 49 dB(A) | - |
| Adjustable ESP | 0-160 Pa | 0-160 Pa | 0-160 Pa | 0-200 Pa | 0-200 Pa | 0-200 Pa |
| Indoor unit dimensions (as published) | 1100 x 720 x 248mm | 1360 x 720 x 248mm | 1360x720x248mm | 1200 x 625 x 380mm | 1200 x 625 x 380mm | 440 x 1400 x 858mm |
Source: Midea HVAC & Energy Australia (mdhome.com.au), Ducted Series - RAC product page. Specifications are reproduced as published by the manufacturer and may change. Please confirm current model details with us before purchase.
Midea Quantum Series
Larger three phase ducted range with high static pressure, listed at 20.5kW and 22.0kW, for bigger homes within our 25kW ducted limit.
- System: Heating and cooling (reverse cycle)
- Refrigerant: R410A
- Power supply: Three phase outdoor unit (380-415V), single phase indoor unit
- Capacities listed: 20.5kW, 22.0kW
- Features listed by Midea: long refrigerant pipe, separable and light indoor unit, full DC inverter, refrigerant pre-charged, high static pressure, wide operation range, seven step fan speed
- Midea's published warranty conditions state the warranty is limited to products with an output capacity below 18 kW, so ask us about warranty cover for these models
Midea Quantum Series brochure (PDF, mdhome.com.au) | Official range page
Specifications: Quantum Series, three phase (2 models)
| Indoor unit | DUCMI200IHC-3PH | DUCMI220IHC-3PH |
|---|---|---|
| Outdoor unit | UCMI200OC-3PH | UCMI220OC-3PH |
| Capacity (as listed) | 20.5 kW | 22.0 kW |
| Power input | 6.7 kW | 6.99 kW |
| Power supply, indoor unit | 220-240V/1/50-60Hz | 220-240V/1/50-60Hz |
| Power supply, outdoor unit | 380-415/3/50 | 380-415/3/50 |
| Indoor unit net dimensions (H x W x D) | 477 x1300 x 910 mm | 477 x1300 x 910 mm |
| Refrigerant piping, liquid / gas | 12.7mm/25.4mm | 12.7mm/25.4mm |
| Max. pipe length / height | 60/40m | 60/40m |
Source: Midea HVAC & Energy Australia (mdhome.com.au), Quantum Series product page. Specifications are reproduced as published by the manufacturer and may change. Please confirm current model details with us before purchase.
Midea slim ducted and bulkhead options
Midea's ducted pages do not list a separate bulkhead range, but two Midea options suit concealed installations. The 7.0kW, 9.0kW and 10.5kW Ducted Series - RAC models are labelled Slim Design (specifications above), and Midea's multi split brochure says its ducted indoor unit "operates quietly, hidden within bulkheads or ceiling cavities". See our Midea multi split page for the multi split range.
Bulkhead units are concealed in a bulkhead or ceiling space and deliver air to one or two rooms through short duct runs. See our bulkhead air conditioner installation page for how we plan and install them in Melbourne homes.
How we install a Midea ducted system in Melbourne
- Enquiry and assessment. We discuss the rooms you want to heat and cool, then assess the home, including room sizes, insulation, windows and orientation, and where the indoor and outdoor units can go.
- Recommendation and written quote. We recommend a Midea ducted range and capacity that suits the home and explain the options before you commit.
- Installation. Our team installs the indoor and outdoor units, runs the refrigerant pipework and condensate drain, and completes the electrical connection as required by Victorian regulations.
- Commissioning and handover. We test heating and cooling operation, set up the controller and show you how to use the system and look after the filters.
- Ongoing service. Regular maintenance keeps the system running efficiently. See our maintenance services.
Manufacturer warranty
Midea air conditioners in Australia are supported by Midea HVAC & Energy Australia (mdhome.com.au). Midea's published Air Conditioning Warranty Conditions list "five (5) years on split wall mounted systems, split ducted systems, cassette systems, standard multi head systems" and also state: "This warranty is limited to the products with an output capacity of below 18 kW." Other periods, conditions and exclusions, including shorter periods for business use, are set out in the Midea Air Conditioning Warranty Conditions (PDF) on the Midea warranty page. Ask us how the conditions apply to the system in your quote.
Victorian Energy Upgrades
EZYAIR is a Victorian Energy Upgrades (VEU) accredited provider (accreditation A2261). If you are replacing an older heater with an efficient reverse cycle system, ask us whether your project may be eligible for a VEU discount. Eligibility depends on the existing heater, the new product and the program rules at the time. Learn more on our Victorian Energy Upgrades page.
You can see a range of wall hung, ducted and bulkhead units on display, many of them operational, at our Burwood showroom at 49 Huntingdale Rd, Burwood VIC 3125.
Related pages
- Midea air conditioning in Melbourne (overview)
- Midea split systems
- Midea multi split systems
- Bulkhead air conditioner installation
- Ducted reverse cycle air conditioning in Melbourne
- Ducted heating in Melbourne
- Ducted air conditioning maintenance
Midea ducted air conditioning FAQs
Which Midea ducted unit suits a home with limited ceiling space?
Midea's Vesta brochure describes an integrated indoor unit just 380mm high that can be installed where ceiling height is less than 400mm, plus a splittable version. Midea labels the 7.0kW, 9.0kW and 10.5kW Ducted Series - RAC models as Slim Design, with a published dimension of 248mm. We inspect the roof or ceiling space before recommending a unit.
What size Midea ducted system does a large Melbourne home need?
It depends on floor area, insulation, glazing and zoning. The Midea ducted ranges on this page are listed from 7kW to 22.0kW. We calculate the heat load before recommending a capacity.
Is Midea Vesta Ducted eligible for VEU?
Midea lists Vesta Ducted as a "VEU approved product". Whether your project qualifies for a Victorian Energy Upgrades discount depends on the existing heater, the exact model and the program rules at the time, and as a VEU accredited provider (A2261) we check this for you.
Can EZYAIR replace my gas ducted heating with a Midea ducted system?
Yes. We replace older ducted heating with reverse cycle ducted systems. As a VEU accredited provider (A2261) we can check whether your project may be eligible for a Victorian Energy Upgrades discount.
What warranty applies to Midea air conditioners?
Midea's published Air Conditioning Warranty Conditions list "five (5) years on split wall mounted systems, split ducted systems, cassette systems, standard multi head systems" and state that the warranty "is limited to the products with an output capacity of below 18 kW". Full conditions and exclusions are on the Midea warranty page at mdhome.com.au.
Request a quote
Planning Midea ducted air conditioning for your Melbourne home? Contact EZYAIR or call 1300 EZYAIR (1300 399 247).
